3DPRNWARE: 3D printing evolving

3DPRNWARE is the software to manage your 3DPRN printer with unique features like:

Dynamic Layer Height
It changes the print parameters in order to adapt the height of the layer according to the inclination of the surfaces.
read more ...

Laser Profile Check
laser control system capable of detecting anomalies of the material deposited during the print.
read more ...

UPS Integration
If the electricity fails, 3dprnware deals with pause printing at the appropriate time.
read more ...

Dynamic Percentage Filling
It offers the possibility to define a different filling percentage in the vicinity of the floor in closed parts.
read more ...

Software owner of 3DPRN for 3D printing

Advanced system for 2.5D and 3D Milling
Now it is possible to add to the print milling phases related to flat surfaces, faces or edges.
read more ...

New formats
Full openness to BREP geometry and a new professional format owner.
read more ...

Vibrated Print
It allows you to create a more or less rough surface according to our preferences.
read more ...

Print on Air
3DPRNWARE offers the possibility to print parts with small portions of undercut unsupported.
read more ...

Precise Z
The precision on the Z axis! Thanks to this function it is possible to obtain the exact height.
read more ...

Other characteristics

  • "Print per Area" mode
  • Automatic multi spool change, for very large prints
  • End wire control. When the printing wire ends the printer pauses and waits for coil-change and then resume the print from where it stopped.
  • Recovery of the interrupted job.
  • Flatness: for large areas, automatic correction of imperfections in the plane with progressive attenuation.
  • Automatic rebuild of the arches, to improve precision and fluidity in the machining of parts processings.
  • Arched X-axis . The objects can be printed undergoing a parametric arc deformation. In this case layers are made following the reference arch shape.
  • Procedure for automatic calibration of the flow.
  • Dimensional calibration procedure for the utmost precision.
  • Different strategies for the utmost quality.
  • Advanced cooling the object in print.
  • Nozzle cleaning management.
  • Multi axis and multi extruder.
  • MultiProfile: you can apply more than one profile on the same subject.
  • Customizable keys
  • Z handling mode optimized for the utmost precision.

Sequential press area

With 3DPRNWARE you can split the printing plane in many areas and print the objects sequentially area after area.
You can manage the print queue print also started: adding/removing objects.
For each area/object you can establish different slice parameters.
You can change the main parameters of the slicer in a straightforward way without the need to open external programs.
For the slice is used 3DPRN-SLICER, Slic3R or Care.

X2 Mode

Printer with two independent heads (X and Z axes). Possible working modes:

  • DUPLICATE, print two copies of the same object
  • Multi MATERIAL, match a different material for each head. The head is not used you park automatically so as not to compromise the quality of the print head activates.
  • Multi-TOOLS, the two heads are independent and each of them you can mount a tool different.
  • Correction, the first 1 or 2 extruders, are mounted on the head according to the milling cutter grinding
  • X 2-2 DOUBLE printer, you have two completely independent printers who use half plan for each.


Il software per stampante 3d 3DPRNWARE, oltre a poter utilizzare i principali slicer sul mercato, viene corredato da uno proprio che utilizza tecniche innovative per ottenere oggetti qualitativamente e strutturalmente migliori. Anche se molto simile agli slicer più utilizzati (Slic3R, Cura,…) presenta una serie aggiuntiva di parametri come la “strategia per i perimetri”, i “correttori di flusso”, la “flatness”, l’”ottimizzazione Z”, la “ricostruzione degli Archi”, “asse X ad arco”, … che fanno la differenza in termini di risultati ottenuti.


Thanks to our software for 3d printer you can split the pot N-print AREAS and print sequentially area after area. You can manage the print queue even at press start adding/removing objects. For each area/object you can establish parameters of different slice. With multiarea objects are more solid struturalmente lowering the risk of failure of the prints for interruptions.


In 3DPRNWARE there are a number of features for controlling the automatic process of grinding/x 2-mode printing MILL. Automatic adjustment mode, 3DPRNWARE, compares the solid with the cutter geometry assembled to optimize the alternation of phases of printing with phases of adjustment.

Multi reel

The function print multi reel, allows making prints that require more than one coil. Indicates the coil weight on the printer and than available, the software will pause before the filament will then resume reel change took place.

Complete control

You have complete control of your 3D printer:

  • movements in the three axes;
  • temperature of the extruder;
  • managing multiple axes and extruders;
  • Manual sending of commands G-CODE;
  • You can visually check the overall dimensions of the extruder body while positioning the object on the printing plate.

ARC printing function

Printing with arched Z-axis.
Objects are printed whereas the x-axis and is no longer linear.
Defines the arc that the x-axis must follow for printing and any object placed on the plate is printed with the starting object layer curved deforming.
A dedicated function lets you print the template on which is printed the object.


No more failed prints ... by now you can resume working from the height at which it was interrupted.

Inserts Application

The function "Z pause" allows to stop the printi at a certain height in several ways:

  • to change the wire
  • to apply inserts during the print.

With the application of inserts for example drowning data, hinges, bearings, ... within the object.

Calibrating extruder

Function that allows you to calibrate the extruder.

3DPRN printers require the use of different types of extruders each optimized for example for printing of special material. This requires the calibration of the extruder just fitted.

Internal slicer

With the slicer native of 3DPRNWARE you have many new options for getting higher quality prints. With the continuous activity of research in the TIPS new techniques have been developed for professional use printers 3DPRN. The plate can be positioned objects to print each with a different profile of slicer. To the same object, it is possible to combine multiple profiles.


When the size of the print area becomes important, the problem of flatness of the platen is felt. 3DPRNWARE solves this problem with Flatness. Set a grid of points, which are the dimensions of the plan, is automatically mapped the surface 3DPRN-WARE will follow during printing. The roughness of the floor are well catered for in the first layer and as dull until you are completely void. This unique feature is crucial especially for the large 3d printersand it makes possible to use small nozzles in also those printers.

Print queue

In the "print to" you can set a work queue. When printing you can append new jobs and/or modify the queue itself. Set in the autonomy area as well as the sequence of objects to create.

Arch Reconstruction

It is well known that 3D printing objects consist of faces that, through the slicer, are dissected and converted into linear movements. This means that any geometric shape has the object movements, will always be linear. With ARC-RECONSTRUCTION of 3DPRNWARE are automatically detected and rebuilt the arches that formed the original object.

Which are the benefits?

  1. Better finish of the printed object.
  2. The curved parts definition is decided regardless the accuracy of the original object and it remains constant.
  3. The printer performs a single statement instead of dozens/hundreds/thousands, with the advantage of not overloading the buffer.
  4. The printer working at constant speed on learning without the stop & go characterizing the parts consist of many small segments.
  5. Better dimensional match especially if you compare the external perimeters with internal emptyings.

Resetting the Z axis and multiple axes

With the expected functionality is very simple to reset the Z, calibrate the offset in the case of multiple axles. Axes z and x 2 or 2 x 2-resetting is done via high-precision optical sensors.

Dimensional calibration

Function that permits to calibrate the axes of your printer in order to obtain very precise pieces.
You have just to indicate the nominal dimensions of the object and those detected and the printer is automatically recalibrated.
With this function you can specify the backlash that could arise between the belts and pulleys after thousands of hours of work.

Thanks to this software for 3d printer, you can get the most out of your 3DPRN!

Software for 3d printer
0/5 (0 Reviews)