Tax credit 2020: Concessions for companies in the industry 4.0
The new tax credit 2020 replaces the previous super and hyper depreciation relating to the industry 4.0. Many news and concessions for businesses. Let's see them in detail. BENEFITS: Me…
Customizable supports
As is well known, supports in 3D printing are fundamental. They should be used when there are objects that have an undercut or overhang. The slicing software, automatically generates the…
3DPRNWARE Software - Version Updates 6.4.0.0
Software update history The 3DPRNWARE and HMI ONBOARD software are constantly evolving. Below is the timeline of the main developments. 3DPRN-WARE Updates ver.21.2.0.1(19/11/2021) -New parameters to set the…
Advanced Kinematics V4: increase printing speed and precision
3DPRN designs a new advanced kinematic system, V4, increasing the speed and accuracy of 3D printers. The new 3DPRN 3D printers are now characterized by a new advanced kinematics, V4,…
How to change IP on Raspberry Pi3 model B
Here is the procedure for changing IP address on Raspberry Pi3 model B nb. please note that the buttons do not correspond with our Italian keyboards, and symbols =…
POA Print on Air – User guide
One of the weaknesses of 3D printing is certainly the printing of very inclined surfaces or with undercut areas., must…
3DPRNWARE installation guide
3DPRNWARE is a portable program, therefore you will not need to perform an installation, you just need to have the folder containing all the files on your computer. We can then proceed by downloading the latest…
Changing the network parameters of the LAN module
The LAN module of 3DPRN printers, where present, has default network settings. The default IP address for the connection is “192.168.0.66”. If you need to change the parameters of…
Upgrade the firmware
Sometimes to solve some printer operation problems, or simply to add print functionality, it is necessary to upgrade the firmware. The firmware with which to upgrade must be…
If 3DPRNWARE crashes on startup
It might happen that by putting the software on a new pc, this does not start immediately giving an error to the opening attempt. Probably the problem is related to some missing components, let's go on…
TPE / TPU printing and rubbers
For printing tpe / tpu and tires, it is preferable to use a 3mm extruder. With 3DPRN printers it is however possible to print these materials even with standard 1.75mm extruders…
Cannot install driver with Win 10 – solutions
In case the printer is not recognized by Windows we can proceed like this:We go to the control panel and in the Hardware and peripherals section we open the tool “Device management”.Now we will have…
Extrusion temperature different from the one set
Sometimes it can happen that despite having been set a certain extrusion temperature, when printing this is different. The cause of this behavior is to be found on the card “Temperature” In the…
Guida up-grade: Reel support
Let's see how to install the new spool holder.First we need to position the anchor block of the holder. It is positioned on the side of the front in the upper rear part, on the…
How to get quality media?
To obtain good quality and easy to remove supports, it is advisable to follow the following tips when setting the profile parameters (3DPRNWARE v.3.6 o successive): Work at the lowest temperature…
Using the end of thread sensor
In case, during a print, the supply of material to the extruder should be interrupted or the material reel running out, the printer will block the print job, by emitting an acoustic signal. During this…
Error opening 3D files
Sometimes it could happen in the 3DPRN-WARE environment that an error is generated when you go to import a 3D file of the DWG or DXF type. To solve the problem…
Replace the extruder nozzle
To change the extruder body nozzle, you must first remove the wire loaded inside the extruder. Once this is done, the extruder must be left hot at a temperature of at least 200 degrees.…
Perform the Z-zero
The Z0 tool allows you to set the zero point of the printing plane. You will need to do this if the print bed is replaced or disassembled, in case…
Protruding layers? – Layer digitization
If systematically every few layers, a protruding one is printed, it can be solved by performing the following procedure: let's go under the button “Connect” and select the tab “Terminal”. After that we go into manual control and type…
How to use the LAN Module
First you have to disconnect the printer from the computer and connect it to a USB socket of the LAN module of the same. We will then have a usb cable that passes from the body…
Perform the Flatness
The Flatness tool allows you to print an object following any imperfections of the print bed and ensure uniform adhesion within the entire print area. To calibrate…
Abnormal axis movement
In case of anomalous behaviors in the movement of the axes, like systematic translation at a certain point of the print towards one direction, it could be wrong values of the backlash of the offending axis…
Machine parameters reset
In case it is necessary to restore the internal parameters of the printer, first note the current values. Go to the terminal and from the manual control launch…
What kind of maintenance does the 3D printer need?
The most frequently asked question is usually the one related to routine maintenance of 3D printers. Generally maintenance is minimal: cleaning of extruded plastic, cleaning the filament ducts, make sure through…
The first layers do not adhere well to the print bed or objects peel off
Sometimes it can happen that the first layers of the print do not adhere well and come off. There are two main reasons, or the quantity of is not sufficient…
It is possible to have a build plate to print larger objects?
Among the various upgrades available, there is the possibility of increasing the surface of the printing plate. However, this possibility is constrained by the structure of the printer itself, so you will have to decide whether to limit…
The printer does not extrude! What to do?
It has probably never happened to you yet, but the printer could, despite the presence of the wire, stop extruding. Don't worry, most likely it is just the filament that has become clogged…
Printing can be interrupted and resumed?
To resume an interrupted print, it is necessary to load the area “Press” the gcode of the print in question. Once this is done, you need to physically measure the height from the printing surface in millimeters…
How to clean the outside of an extruder?
To better clean the visible part of the extruder, it is advisable to first bring it to a temperature of 200 °, doing so all the burrs of material, they will soften. At this point you can…
How to pull the straps if they are loose?
You will notice that at the ends of each strap there are supports to lock them. These supports are anchored with screws which must be screwed until the belt acquires the correct one…
How to change the material spool?
In case you want to change the reel, the first step is to bring the extruder to temperature (at least 180 °), after that you have to rotate the gear wheel by hand to extrude…
How to replace an extruder?
The manual section contains the procedure for replacing the extruder with the emergency one. Today we will see how to disassemble an extruder to replace it. Let's make sure we have it on hand…
I can print multiple objects at the same time?
One of the many functions offered by the 3DPRN-WARE software, is precisely that of being able to set up sequential printing where it is possible to divide the print bed into areas…